DM-MD6X4

DM-MD6X4

6x4 DigitalMedia™ Distribution Center
Provides a very simple and cost-effective solution for distributing multiple high-definition AV sources to up to four rooms as part of a complete Crestron® system.

DigitalMedia isn't just for large, expensive homes and facilities. The DM-MD6X4 DigitalMedia Distribution Center provides a very simple and cost-effective solution for distributing multiple high-definition sources to up to four rooms as part of a complete Crestron® system. Featuring DigitalMedia 8G+™ technology, the DM-MD6X4 delivers ultra-reliable, ultra high-bandwidth signal routing over inexpensive CAT5e wiring[1]. Everything about the DM-MD6X4 is engineered to deliver a transparent user experience and the highest performance.

HD Matrix Switcher
The DM-MD6X4 provides six HDMI® inputs to handle HDTV receivers, DVD or Blu-ray Disc® players, media servers, computers, and other HD digital sources. Outputs include one HDMI and three DigitalMedia ports, furnishing simple one-wire connectivity for a local display or audio processor, and three additional displays anywhere in the house. QuickSwitch HD® matrix switching allows any display to view any source at any time.

DigitalMedia 8G+™
Crestron exclusive DM 8G+™ technology affords the ultimate in simplicity, providing a true one-wire interface for distributing high-definition video, audio, and control signals to multiple displays throughout a residence or commercial structure. Simply connect a DM 8G+ receiver[2] at each flat-panel display or projector for a complete AV and control interface. Just one CAT5e wire run to each receiver transports pure, uncompressed HD video, 7.1 surround sound audio, 10/100 Ethernet, and control signals for a fully integrated media system with minimal wiring. DM 8G+ allows for wire runs up to 330 feet (100 meters) using CAT5e or Crestron DigitalMedia 8G™ Cable.[1]

QuickSwitch HD®
Handling high-definition digital media means handling HDCP (High-bandwidth Digital Content Protection), the encryption scheme that content providers use to protect their DVDs, Blu-ray Discs, and broadcast signals against unauthorized copying. Viewing HDCP encrypted content requires the source device to "authenticate" each display in the system and issue it a "key" before the content can be viewed. Ordinarily this causes a complete loss of signal for up to 15 seconds each time a new source or display is selected anywhere in the system. To make matters worse, every source device has a limited number of keys available, so connect too many displays and the source will simply stop outputting a signal without warning.

Not to worry — Crestron QuickSwitch HD manages the keys for every HDCP-compliant device in the system, maintaining continuous authentication for each device to ensure fast, reliable routing of any source to any number of display devices.

EDID Format Management
With all of today's varied AV sources comes an excess of confusing video and audio formats to keep track of, and chances are not every device in your system supports all of the same formats. Such conflicts can wreak havoc any time you route one source to more than one display or audio component. The Blu-ray player that's feeding your 1080p projector in the theater may restrict itself to a lower resolution, or even shut off completely, if someone decides to view the same signal on the 20" TV in the kitchen. And, instead of enjoying your theater's incredible 7.1 surround sound, you may find yourself limited to 5.1 or even plain old stereo.

The DM-MD6X4 eliminates such conflicts by managing the EDID (Extended Display Identification Data) that modern digital devices use to communicate their capabilities. Through the DM-MD6X4, the format and resolution capabilities of each device can be assessed, allowing the installer to configure EDID signals appropriately for the most desirable and predictable behavior.

A Scaler for Every Display
Scaling capability can be added to the DM-MD6X4 using select DM 8G+ receivers with built in high-definition scalers.[2,3] By placing an independent high-performance scaler at every display device, DigitalMedia truly delivers the most flexible and user-friendly solution for routing multiple disparate sources to many different display devices. This "Distributed Scaler Approach" ensures an optimal image on every screen no matter what sources are selected. Distributed scaling allows a high-res computer source to be viewed on any display in the home, and allows a high-definition 3D source to be viewed on lower-resolution 2D displays without compromising the original signal, letting you share your theater's full HD 1080p 3D image with smaller, lesser displays in the kitchen, bathroom, and bedrooms.

Multi-Channel HD Audio Routing
HDMI is the key to handling all the latest 7.1 surround sound formats like Dolby® TrueHD and DTS-HD Master Audio™. The DM-MD6X4 supports high-performance routing of all surround sound encoded media, as well as uncompressed multi-channel linear PCM, to every display and AV receiver.

Built-in Ethernet Switch
In addition to transporting digital video and audio, DigitalMedia can also extend high-speed Ethernet to display devices that require a LAN connection. Ethernet is also utilized internally by the Crestron control bus to manage all of the DM devices in the system and provide display control in each room. Through its 10/100 Ethernet port, the DM-MD6X4 provides a single-point connection to a home network or corporate LAN, requiring just one IP address for the complete DM system.

USB HID Extender
With built-in USB HID (USB Human Interface Device) signal routing, the DM-MD6X4 lets you control a centralized computer or media server using a mouse or keyboard in another room. The mouse/keyboard can be connected to any DM 8G+ receiver that includes a USB HID port, while the host computer is connected to the USB HID port on the DM-MD6X4 rear panel.

Easy Setup
Every step of the DM-MD6X4 setup is designed to be quick and easy using its front panel or Crestron Toolbox™software, configuring inputs and outputs automatically while letting the installer make intelligent design decisions along the way. Out of the box, the DM-MD6X4 front panel supports basic signal routing for testing and troubleshooting during installation. The front panel label strips can be customized using Crestron Engraver software or standard 3/8" tape labels, allowing for the clear designation of each input and output. Inputs and Outputs may also be designated by name through the software to appear on the LCD display.

Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.

Key Features: 
  • Provides a low-cost, high-performance multiroom HD AV signal routing solution
  • Distributes uncompressed digital video and audio over CAT5e twisted-pair wire[1]
  • Affords a true one-wire solution using DigitalMedia 8G+™ technology
  • Features independently-switchable DM 8G+™ outputs for 3 remote displays
  • Allows up to 330 ft (100 m) wire distance to each display
  • Includes one HDMI® output for a local display or audio processor
  • Provides inputs for 6 HDMI, DVI, or DisplayPort Multimode sources[4]
  • Supports Deep Color, 3D, and 7.1 channel HD lossless audio
  • Supports video resolutions up to WUXGA 1920x1200 and HD 1080p60
  • QuickSwitch HD® technology manages HDCP keys for reliable, low-latency switching
  • Performs automatic AV signal format management via EDID
  • Allows independent scaling for every display through select DM receivers[2,3]
  • Enables USB HID mouse and keyboard signal extension
  • Includes integrated Ethernet switch
  • Provides Power over DM® for PoDM compatible receivers
  • Provides easy setup and diagnostics tools via front panel or software
  • Includes built-in universal power supply
  • Allows native Crestron system integration via Ethernet
  • Standard component width or 2-space rack-mountable
Description notes: 
    1. For DM 8G+ wiring up to 330 ft (100 m) between devices, use Crestron DM-CBL-8G DigitalMedia 8G Cable, Crestron DM-CBL DigitalMedia Cable, Crestron DM-CBL-D DigitalMedia D Cable, or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the DigitalMedia Infrastructure Guide, Doc. #4556 for complete wiring guidelines, and theCrestron DigitalMedia Design Guide, Doc. #4789 for complete system design guidelines. All cable sold separately.
    2. Item(s) sold separately.
    3. DM 8G+ receivers with built-in scaling include the DM-RMC-SCALER-C and DM-RMC-200-C. For the HDMI output, use the HD-SCALER.
    4. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVIinterface cables available separately.

    This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps.

    Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

    Crestron, the Crestron logo, Crestron Toolbox, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, and QuickSwitch HD are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Blu-ray Disc is either a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or other countries. Dolby, Dolby Digital, and the double-D symbol are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, DTS-HD Master Audio, and the DTS logos and Symbol are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2011 Crestron Electronics, Inc.

Video
  Switcher 6x4 digital matrix switch, Crestron QuickSwitch HD®
  Input Signal Types HDMI®, DVI[4], DisplayPort Multimode[4]
  Output Signal Types HDMI, DVI[4], DM 8G+™ (DigitalMedia™ over one CAT5e twisted-pair copper wire)[1]
  Formats HDMI w/Deep Color & 3D, DVI, HDCP content protection support, HDTV up to 1080p60, computer graphics up to UXGA/WUXGA, NTSC or PAL
  Input Resolutions, Progressive 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
  Input Resolutions, Interlaced 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
  Output Resolutions Matched to inputs
Audio
  Switcher 6x4 digital matrix switch, audio-follow-video
  Input Signal Types HDMI, DisplayPort Multimode[4]
  Output Signal Types HDMI, DM 8G+
  Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD® High Res, DTS-HD Master Audio™, Up to 8ch PCM
Communications
  DigitalMedia DM 8G+, HDCP management, EDID format management
  Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, RSTP; for control and console
  USB Signal extension/routing for USB HID class devices, USB service port for computer console
Ethernet Switch
  Provides (1) onboard 10Base-T/100Base-TX Ethernet port, (1) internal Ethernet port for the switcher, and up to (5) remote 10Base-T/100Base-TX Ethernet ports via select outboard devices
Connectors
  HDMI INPUT 1 – 6 (6) 19-pin Type A HDMI female, digital video/audio inputs;
Signal Types: HDMI, DVI, or DisplayPort Multimode[4]
  HDMI OUTPUT 1 (1) 19-pin Type A HDMI female, digital video/audio output;
Signal Types: HDMI, DVI[4]
  DM OUTPUT 2 – 4 (3) 8-pin RJ45 female, shielded;
DM 8G+ outputs, capable of supplying PoDM (Power over DM®);
Connect to DM 8G+ inputs of DM receivers/room controllers or other DM devices via CAT5e or Crestron DM-CBL-8G cable[1]
  USB HID (1) USB Type B female;
USB device port for connection to the USB host interface of a computer or other USB HID-compliant host
  LAN (1) 8-wire RJ45 female, shielded;
10Base-T/100Base-TX Ethernet port
  100-240V~2.0A MAX 50/60Hz (1) IEC C14 male chassis plug, main power input;
Mates with removable power cord, included
  G (1) 6-32 screw, chassis ground lug
  COMPUTER (front) (1) USB Type B female;
USB 1.1 computer console port
LCD Display
  Display Type 16-bit TFT active matrix color LCD
  Size 2 inch (52 mm) diagonal
  Resolution 220 x 176 pixels
  Functions Displays setup menus, EDID and HDCP details for source and destination devices, audio/video signal information, and other details; allows custom naming of inputs and outputs
Controls & Indicators
  HW-R (1) recessed miniature pushbutton for hardware reset
  Nav Pad (1) 5-way navigation pad for menu navigation and parameter adjustment
  HOME (1) pushbutton, returns to the home menu
  BACK (1) pushbutton, steps menu back one level
  INPUT 1 – 6 (6) pushbuttons and green LEDs, select input for routing
  OUTPUT 1 – 4 (4) pushbuttons and green LEDs, select output destination(s)
  LAN (rear) (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
Power Requirements
  Main Power 2 Amps @ 100-240 Volts AC, 50/60 Hz
  Power over DM (PoDM) Supplies power to up to three DM 8G+ PoDM powered devices
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 310 BTU/hr
Enclosure
  Chassis Metal with matte black finish, vented sides, fan-cooled
  Faceplate Metal, matte black finish with polycarbonate label overlay
  Mounting Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
  Height 3.47 in (89 mm) without feet
  Width 17.03 in (433 mm), 19.00 in (483 mm) with ears
  Depth 13.38 in (340 mm)
Weight
 

12.0 lb (5.5 kg)

Technical notes: 
  1. For DM 8G+ wiring up to 330 ft (100 m) between devices, use Crestron DM-CBL-8G DigitalMedia 8G Cable, Crestron DM-CBL DigitalMedia Cable, Crestron DM-CBL-D DigitalMedia D Cable, or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the DigitalMedia Infrastructure Guide, Doc. #4556 for complete wiring guidelines, and theCrestron DigitalMedia Design Guide, Doc. #4789 for complete system design guidelines. All cable sold separately.
  2. Item(s) sold separately.
  3. DM 8G+ receivers with built-in scaling include the DM-RMC-SCALER-C and DM-RMC-200-C. For the HDMI output, use the HD-SCALER.
  4. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVIinterface cables available separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps.

Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

Crestron, the Crestron logo, Crestron Toolbox, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, and QuickSwitch HD are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Blu-ray Disc is either a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or other countries. Dolby, Dolby Digital, and the double-D symbol are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, DTS-HD Master Audio, and the DTS logos and Symbol are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2011 Crestron Electronics, Inc.

Publications: 

Spec Sheet

Spec Sheet (PDF - 1.5 M) 
Rev. Date: 9/16/2011

Quick-Start Guide

Quick-Start Guide (PDF - 751 K) 
Doc. No. 7218A 
Rev. Date: 10/7/2011

Reference Guide

Reference Guide (PDF - 1.34 M) 
Doc. No. 4579C 
Rev. Date: 4/16/2012 
Note: IP Considerations Guide. This guide is intended to outline the requirements, best practices and preferred methods of implementing Crestron devices on enterprise level networks. Rev. B provides updates on DM network modes.

Design Guide

Design Guide (PDF - 19.52 M) 
Doc. No. 4546A 
Rev. Date: 4/5/2012 
Note: DM Design Guide, Second Edition
Complete guide to designing a Crestron DigitalMedia system.

Installation and Operations Guide

Installation And Operations Guide (PDF - 2.26 M) 
Doc. No. 7196A 
Rev. Date: 10/7/2011 
Note: For DM-MD6X4 and DM-MD6X6

CAD Drawings and Revit® Files: 

Zoomable Drawing

Zoomable Drawing

Cad Files

Cad Files (ZIP - 904 K)
Rev. Date: 5/3/2011

Available Models: 
Model Description      

DM-MD6X4

6x4 DigitalMedia™ Distribution Center