Dual Current Sensor Module

ST-CS

An expansion module for Crestron control systems to provide power status feedback for two independent devices.


NET (2) 6-pin RJ11 female, Cresnet slave ports, paralleled;
Connect to Cresnet control network
12VDC (1) 2.5mm barrel DC power jack;
12 Volt DC power input (PW-1205 power pack included)
POWER A – B (2) 3-prong grounded AC sockets;
Sensed AC power outlets;
Maximum Total Load: 10 Amps (1000 Watts) at 120 Volts AC;
Minimum Sensing Load: 0.033 Amps (4 Watts) at 120 Volts AC;
Voltage Range: 90 to 125 Volts AC @ 50-60Hz
POWER IN (1) 6 ft (1.83m) cable with grounded AC plug;
Connects to AC power source
NET (1) amber LED, indicates communication with Cresnet system
PWR (1) green LED, indicates power supplied from Cresnet network or local power pack
FULL, POWER A – B (2) recessed trim pots and red LEDs, adjust “full load” threshold for corresponding outlet
PARTIAL, POWER A – B (2) recessed trim pots and amber LEDs, adjust “partial load” threshold for corresponding outlet
Height 1.80 in (46 mm);
1.70 in (44 mm) without feet
Depth 6.32 in (161 mm)
Width 7.07 in (180 mm)
Chassis Metal, black finish
Faceplate Extruded aluminum, black finish with polycarbonate label overlay
Mounting Freestanding or 1U 1/2-width 19-inch rack-mountable (adhesive feet included, ST-RMK rack kit sold separately)
Temperature 41° to 113°F (5° to 45°C)
Humidity 10% to 90% RH (non-condensing)
Cresnet Power Usage 3 Watts (0.125 Amp @ 24 Volts DC) with no power pack connected
Power Pack 0.5 Amp @ 12 Volts DC;
120 Volts AC, 60 Hz power pack, model PW-1205, included
2.72 lb (1.24 kg)
Available Models