HD-TX3-F

HDMI® over Fiber Transmitter with analog audio, RS-232, IR, Ethernet, and USB HID; includes PW-1215WU power supply, requires HD-RX3-F

  • HD-TX3-F: Bottom angle
  • HD-TX3-F: Top angle

HDMI® over Fiber Transmitter with analog audio, RS-232, IR, Ethernet, and USB HID; includes PW-1215WU power supply, requires HD-RX3-F

HD-TX3-F

Works with the HD-RX3-F HDMI over Fiber Receiver to provide a simple, reliable solution for extending uncompressed HDMI, analog audio, Ethernet, USB HID and control signals up to 1000 feet over a single fiber optic cable. More Details


Crestron® HDMI® over Fiber Transmitters and Receivers deliver professional-grade digital HD AV signal extension for use in the home, classroom, auditorium, or corporate boardroom. Without any special setup or configuration, the HD-TX3-F transmitter works with an HD-RX3-F receiver [1] to enable wire runs up to 1000 feet (300 m) over a single multimode fiber strand [2]. The use of fiber not only facilitates long wire runs, but is also ideal for wiring to outdoor devices and between buildings, providing optical isolation against ground loops, lightning surges, and other electrical disturbances. The HD-TX3-F simultaneously handles high-definition digital video and audio, analog audio, Ethernet, USB HID [3], RS-232, and IR signals.

Robust HD Signal Extension
Crestron HDMI over Fiber technology delivers ultra-reliable extension of uncompressed video and computer signals. The HD-TX3-F handles video resolutions up to Full HD 1080p60, and computer resolutions up to UXGA and WUXGA, with support for HDCP and Deep Color. Audio capabilities include support for Dolby Digital®, DTS®, and uncompressed 7.1 linear PCM, as well as analog stereo signals. In addition to HDMI, the HD-TX3-F is also compatible with DVI and Dual-Mode DisplayPort sources using an appropriate adapter or interface cable [4].

A Fully Linked Solution
In addition to video and audio, the HD-TX3-F provides for the extension of networking and control signals for a true one-wire AV interface solution. Its 10/100 Ethernet port affords high-speed LAN connectivity over the full 1000 ft length of fiber. The USB HID port allows a keyboard, mouse, or other USB HID compliant device to be connected at the receiver and used to control a computer or other host at the transmitter location.[3] IR and bidirectional RS-232 control signals may also be routed to control a display device and other equipment.

Comprehensive without Complication
Crestron HDMI over Fiber affords a very dependable signal extension solution that's simple to implement. No special configuration or programming is required — just connect your source and display and enjoy high-quality HD video and audio from across the room — or from another entire building. The HD-TX3-F is housed in an attractive, compact enclosure, with provisions for mounting to any flat surface, or to one rail of a 19" EIA equipment rack.

Crestron offers the fiber optic cable, connectors, and termination kit for a complete, easy wiring solution. A range of professional AV interface cables and wall plates is also available to complement the HD-TX3-F for a total custom installation solution.[1]

  • Extends uncompressed digital video, audio, networking, USB HID, and control signals 1000 feet (300 m) over a single multimode fiber
  • Works reliably without any programming or configuration
  • Supports HDMI® with Deep Color
  • Also compatible with DVI and Dual-Mode DisplayPort [4]
  • Supports 7.1 channel lossless audio up to 48 kHz
  • Supports DTS® and Dolby Digital® encoded audio
  • Includes an analog stereo audio input
  • Handles resolutions up to WUXGA 1920x1200 and HD 1080p60
  • Passes CEC, EDID, and HDCP
  • Supports 100Base-TX Fast Ethernet
  • Includes universal IR repeater up to 192 kHz
  • Extends bidirectional RS-232 up to 115k Baud
  • Includes built-in USB HID mouse/keyboard extender [3]
  • Provides electrical isolation for outdoor runs
  • 12VDC universal power pack included
Analog Formats Stereo 2-channel
Analog Performance: Frequency Response: 20 Hz to 20 kHz ±0.75 dB;
S/N Ratio: >90 dB, 20 Hz to 20 kHz A-weighted;
THD+N: <0.05% @ 1 kHz;
Stereo Separation: >90 dB
Analog-To-Digital Conversion 24-bit 48 kHz
Digital Formats Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, LPCM up to 8 channels
Input Signal Types HDMI (Dual-Mode DisplayPort compatible [4])
Sampling Rate Up to 48 kHz
Ethernet 10Base-T/100Base-TX Ethernet signal extension
Fiber 50/125 or 62.5/125 µm multimode optical fiber, 1000 ft (300 m) cable length, 850 nm & 1310 nm transmit, 1550 nm receive [2]
USB Supports USB HID class devices [3]
Note: Mini USB port is for factory use only.
12VDC 1.5A (1) 2.5 x 5.5 mm DC power connector
12 Volt DC power input;
PW-1215WU power pack included
AUDIO (1) 3.5 mm TRS mini phone jack;
Unbalanced stereo line-level audio input;
Input Impedance: 10k ohms;
Input Level: 2 Vrms maximum
COM (1) 3-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, software handshaking support
G (1) 6-32 screw, chassis ground lug
HDMI IN (1) 19-pin Type A HDMI female;
HDMI digital video/audio input (DVI & Dual-Mode DisplayPort compatible [4])
IR IN (1) 2-pin 3.5 mm detachable terminal block;
IR/Serial repeater input port;
IR signal input up to 192 kHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
LAN (1) 8-pin RJ45 female;
10Base-T/100Base-TX Ethernet port
MM OPTICAL (1) SC female optical fiber connector;
Multimode fiber output;
Connects to MM OPTICAL port of an HD-RX3-F receiver via CresFiber 8G fiber optic cable [2]
USB HID (1) USB Type B female;
USB device port for connection to a computer or other USB HID-compliant host [3]
Depth 1.43 in (37 mm)
Height 5.92 in (150 mm)
Width

4.56 in (116 mm)

Chassis Aluminum w/polycarbonate label overlay and (4) integral mounting flanges
Mounting Freestanding, surface mount, or attach to a single rack rail
Humidity 10% to 90% RH (non-condensing)
Temperature 32° to 104° F (0° to 40° C)
LAN (2) LEDs, green indicates Ethernet link status, amber indicates Ethernet activity
Power (1) Green LED, indicates operating power supplied via external power pack
Power Pack 1.5 Amps @ 12 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-1215WU, included
Input Signal Types HDMI® w/Deep Color (DVI & Dual-Mode DisplayPort compatible [4])
Resolutions, Interlaced 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165 MHz pixel clock
Resolutions, Progressive 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165 MHz pixel clock
17.9 oz (508 g)
Available Models
Available Accessories